Welch Allyn Spot VS100 - To Set the Language; To Set the System Clock

CAUTION Do not force the power connector on the power
supply into the vision screener. Using force can damage the
device and voids the warranty. The power connector on the
power supply easily inserts into the vision screener.
3. Plug the power cord into an available wall outlet and turn on the device to charge the
vision screener.
4. Press and release the Power button.
To set the language
1. From the Home screen, touch Tools, and then Language.
2. Touch the radio button next to the desired language. By default, the selected
language is English.
3. To return to the Tools screen, touch the arrow in the upper-right corner.
To set the system clock
The system clock displays in the upper right-hand corner of the Home screen. If the
vision screener has been in storage, you might need to reset the system clock.
1.
From the Home screen, select Tools, and then Date/Time.
2. Next to Time or Date, select Edit.
3. Delete the current setting, and then update.
4. Touch OK.
5. If desired, reset the Date Format.
6. To return to the Tools screen, touch the arrow in the upper-right corner.
Directions For Use Setting up the vision screener 17