Welch Allyn Spot VS100 - To Lock;Unlock the Vision Screener; To Check the Storage Capacity

CAUTION If you create a security PIN, you cannot disable security on the
device without the PIN. If you lose or forget the PIN, contact customer
service. The device must be restored to factory settings. Any data on the
device will be lost.
1. Touch Tools, then touch Security.
2. Check Use security PIN code.
3. Enter and then re-enter the security PIN code.
4. To disable security, touch Tools, then touch Security.
Uncheck Use security Pin code.
5. Enter the security PIN code.
6. To return to the previous menu, touch the X in the upper-left corner of the screen.
To lock/unlock the vision screener
1. To lock the vision screener, hold down the Power button.
2. Touch Lock.
A Lock symbol appears on the screen.
3. To unlock the vision screener, touch .
A number screen appears.
4. Enter the security PIN code.
To check the storage capacity
If the storage capacity is 100% full, the vision screener stops working until you delete
records from the device.
1.
From the Home screen, touch Tools, and then About.
The storage displays in the upper-right corner.
2. To return to the Tools screen, touch the X in the upper-left corner.
36 Advanced settings on the vision screener Welch Allyn
®
Spot
™
Vision Screener Model VS100