Advanced settings on the vision screener
Before configuring network security
If the device is configured with wireless network settings, you can view screening
results on a computer. If you want to print screening results, you can connect the device
to a USB printer or you can add a wireless network printer.
Wireless networks use security to protect your information. Your system administrator
can supply you with the security information needed to access the network. Before you
can connect the device to a network, you need the network name, password, and
security type. By default, the first letter you type in these fields is uppercase. To type the
first letter in lowercase, touch the up arrow repeatedly until the arrow displays as a dark
arrow with a white outline.
If a network security type is not selected, the connection to the wireless network is not
secure and any information sent or received on this network is not necessarily
confidential.
CAUTION Product security exploits can cause the device or device data to
become unavailable or cause data security breaches. Avoid inserting
uncontrolled or unsecured USB drives into the USB port or connecting to a
wireless network with incomplete security.
Connecting a device to the network
1. Touch Tools, and then touch Network.
If the device is already configured with network settings, these display on the
bottom of the screen.
2. If the settings are correct, touch the X in the upper-left corner to return to the Tools
screen.
3. To connect a device to the network, add the network name and security type. For
details, see the following sections.
To add/change the network name
1. Touch within the Network Name field.
The keyboard appears.
2. Enter the name of the network.
3. Touch OK to save your changes and return to the previous screen.
25
To Next Page
Loading...
