Welch Allyn Spot VS100 - To Delete Records

2. Insert the USB drive in a computer and add the subject information to the
SpotSubjects.csv file. Save this file at the top level of the USB drive (not in a folder).
For more information, see Create a subject list.
3. Import the files back to the vision screener. For more information, see Import.
4. On the vision screener, touch Queue to bring up the subject list.
5. Select the subject you want to screen. If needed, modify the subject information. For
more information, see To screen a subject.
6. Touch Go.
7. When the screening is completed, touch Home.
8. Repeat steps 4-7 until you have screened all the subjects.
Once finished, you can export the files to a USB 2.0 drive to easily scan the results on a
computer. Individual screening results are saved in the pdf subfolder. A list of all the
screening results is saved under the db subfolder.
To delete records
CAUTION Verify you have successfully exported the records to a USB 2.0
drive before you touch Clear All. If you touch Clear All on the Queue
screen, all the unscreened subject information is deleted. If you touch Clear
All on the History screen, all completed exams on the device are deleted.
1. From the Home screen, touch Queue or History.
2. Touch Clear All.
3. Touch Delete.
24 Screening subjects Welch Allyn
®
Spot
™
Vision Screener Model VS100