CM2P201 User Guide
Repeat the operations to add next TS (frequency) until NIT streams of all the frequencies
have been included. Finally click Apply button to let all configuration take effect. Then
searching programs in your STB, you will get all programs in the order of LCN which you set.
5.3.5CM2-ISDBT-R01/R01A
CM2-ISDBT-R01/R01A module supports up to 4/8 adjacent frequencies modulating with 1 RF female
connector for output.
CM2-ISDBT-R01>Basic Setting
To Next Page
Loading...
