www.Welltec.pro 15
Remote control
Timer
Press the „TIMER”
button on the remote control to program the
time after which the unit will turn off. Possible settings are 1 - 24h.
You can also schedule the unit to turn on by pressing the „TIMER”
button when the air conditioner is off. When programming this
setting, you can select the desired temperature with the buttons
„TEMP+” „TEMP-” and the fan speed with the „FAN” button.
TIMER
Sleep Mode
Press the „SLEEP” button on the remote controller to turn on. If the
air conditioner is in cooling mode, the unit will raise the target
temperature by 1°C after one hour. After two hours, the temperature
will increase by a maximum of 2°C.
In heating mode, the air conditioner will lower the target
temperature by 1°C
after one hour of operation. After two hours,
the temperature will drop a maximum of 2°C.
SLEEP
Swing mode
Press the „SWING” button on the remote control to
outlet louver oscillation.
SWING
To Next Page
Loading...