www.Welltec.pro 6
First use
Caution. Let the air conditioner stand upright for 8 to 12 hours before initial operation.
This prevents damage to the compressor.
Remove the device from the packaging.
Unroll the tube and screw the air conditioner
frame (1) and window kit frame (2) clockwise
onto the tube.
Attach the frame to the air conditioner (1)
by aligning it with the square mark (3) and
then slide it down (4).
Expose the pipe to the outside. We
recommend using a window kit or window seal.
Connect the air conditioner to the power
supply.
Start the air conditioner by pressing the
„Power” button on the control panel or remote
control.
To Next Page
Loading...