www.Welltec.pro 17
Air purification function
HEPA filter installation
The air conditioner comes with a HEPA filter which is used to activate the air purification
function.
NOTICE!
When the air conditioner is in air purification mode, the heating, cooling and
dehumidification functions cannot be used. To use these functions, the HEPA filter
needs to be removed.
1. Remove the air outlet frame. 2. Remove the filter from the package and install
it in the marked location.
3. Check that the filter fits proper into the
frame.
4. Install the air outlet frame in place and start
the unit.
When the air conditioner is started with the HEPA filter installed, the „PURIFYING” lamp on
the control panel lights up.
To Next Page
Loading...