WELLTECH ATA-172 - Page 6

ATA Web user guide
6 / 114 2015/1/8
Function
Disable Call
Waiting
#139# None
System will automatically
reboot and Call Waiting will
be disabled.
Function
Enable
Anonymous
#140# None
System will automatically
reboot and Send
Anonymous CID was
enabled.
Function
Disable
Anonymous
#141# None
System will automatically
reboot and Send
Anonymous CID was
disabled.
Function Blind Transfer #510# None
This feature was only
performed during a phone
call. For ATA-171M, this will
transfer the current IP line
to another IP line.
Function
Attendant
Transfer
#511# None
Only be performed in a
phone call conversation.
For ATA-171M, this will
transfer the line to IP from
PSTN (must be in IP mode to
execute this command)
Function
3-way calling
(IP
Conference)
#512# None
Only be performed in a
phone call conversation.
Function
Attendant
Transfer
#514# None
Only be performed in a
phone call conversation. For
ATA-171M, this will transfer
the call to PSTN from IP
(must be in PSTN mode to
execute this command)
Info
Check WAN
IP Address
#126# None
IVR will announce the
current WAN IP address of
the ATA
Info
Check LAN IP
Address
#120# None
IVR will announce the
current LAN IP address of
the ATA
Info
Check IP
Type
#121# None
IVR will announce if DHCP in
enabled or disabled.
Info
Check the
Phone
Number
#122# None
IVR will announce current in
use VoIP number
Info
Check
Network
Mask
#123# None
IVR will announce the
current network mask of the
ATA.
Info
Check
Gateway IP
Address
#124# None
IVR will announce the
current gateway IP address
of the ATA.
Info
Check
Primary DNS
Server
Setting
#125# None
IVR will announce the
current setting in the
Primary DNS field.
Info
Check
Firmware
Version
#128# None
IVR will announce the
version of the firmware
running on the ATA.
Setting
Set DHCP
client
#111# None
The system will change to
DHCP Client type
Setting
Set Static IP
Address
#112xxx*xxx*xx
x*xxx#
Enter IP address using
numbers on the telephone
keypad. Use the * (star) key
when entering a decimal
point.
DHCP will be disabled and
system will change to the
Static IP type.