EasyManua.ls Logo

WELLTECH ATA-172 - Page 71

WELLTECH ATA-172
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ATA Web user guide
71 / 114 2015/1/8
Item Description
numbers; maximum length is 5 bytes with the range of
8000~64000.
Local SIP Port of
phone 1
Default: 5060~5060.
Set up the Start and End SIP Port Range of phone 1.
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Local RTP Port of
phone 1
Default: 20000~21999.
Set up the Start and End RTP Port Range of phone 1.
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Local SIP Port of
phone 2
Default: 5062~5062.
Set up the Start and End SIP Port Range of phone 1.
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Local RTP Port of
phone 2
Default: 22000~23999.
Set up the Start and End RTP Port Range of phone 1.
This column can only enter numbers; maximum length is 5 bytes
with the range of 1024~40000.
If you want to Set up a fixed port, please Set up the same value
of Start and End Port.
If you want to Set up a range, the left column is Start Port, the
right Port is End Port.
Hold Type Default: RFC 2543 (0.0.0.0).
Set up Hold (define by RFC).
When this function is on, the information of [Connection
Information (c): IN IP4 xxx.xxx.xxx.xxx] will change IP to the
device of executing the function.
Provide options: RFC2543 (0.0.0.0), Type1 (Send only), Type2
(inactvie).
DTMF Type Default: RFC 2833.
InBand: When you enter key information, the [Ethereal] will not
show it.
RFC2833: When you enter key information, the [Ethereal] will

Related product manuals