WERSI SONIC USER MANUAL
1.2 The Easy Mode Main Display Explained:
WERSI DIRECT LTD - 0800 084 2013 - www.wersidirect.com - info@wersidirect.com
Werks-Total-Preset
This translates to:
‘Factory-Total Presets
Bank
Shows the respective bank
that the Total Preset is
categorized under.
Name
Shows the name of the cur-
rently selected Total Preset
Nummer (Number)
Shows the Preset Number
where the Preset is stored
in the Total Preset data-
base.
Date & Time
Shows the current date and
time.
Surface ID
This box has no function at
this time.
(Now changed to ‘Save’ in the De-
cember 1.01-06 software release,
but the function is still not active.
Easy Mode /
Switch this toggle switch
down to switch to the
Professional Mode.
Einstellungen
(Settings)
Currently, this button has
no functions. Please ignore
it. It will be implemented in
a future software release.
Upper Manual (Ober Manual)
The Green box shows us the three sounds for the Upper Manual. The small red LED indicates that the sound is active. When the
red light is off, the sound is inactive.
The split point of each sound is indicated below each box.
Lower Manual (Unter Manual)
The Green box shows us the three sounds for the Lower Manual. The small red LED indicates that the sound is active. When the
red light is off, the sound is inactive.
The split point of each sound is indicated below each box.
Pedal
One sound is available for the Pedal in the Easy Mode. Please note that in Easy Mode
you cannot split the pedal board. This is because only one sound can be selected!
You can split the pedal board in the Professional Mode is you desire.
To Next Page
Loading...
Need help?
General
