Lit. No. 95748/95749, Rev. 04 22 January 1, 2017
MAINTENANCE
AT THE END OF EACH SEASON OR
AFTER EXTENDED STORAGE
• Wash out the hopper and rinse off all external
surfaces.
• Apply dielectric grease on all electrical
connections to prevent corrosion.
• Lubricate all grease ttings with good quality
multipurpose grease.
• Oil or paint all bare metal surfaces.
FUSE REPLACEMENT
See the Harness Wiring Diagram for fuse locations.
If a problem should occur and fuse replacement is
necessary, the replacement fuse must be of the same
type and amperage rating as the original. Installing a
fuse with a higher rating can damage the system and
could start a re.
RECYCLE
When your spreader has performed its useful life,
many of its components can be recycled as steel.
Gear oil shall be disposed of according to local
regulations. Balance of parts made of plastic shall be
disposed of in customary manner.
GEAR OIL SPECIFICATION
Use Mobil SHC 632 or Exxon SHP 320 or equivalent.
To Next Page
Loading...
