2-2
This room air conditioner is equipped with a
power supply cord required by UL. This power
supply cord contains state-of-the-art electron-
ics
that sense leakage current. If the cord is
crushed, the electronics detect leakage cur-
rent
and power will be disconnected in a frac-
tion of a second.
T
o test your power supply cord:
1. Plug power supply cord into a grounded
3 prong outlet.
2. Press RESET.
3. Press TEST (listen for click; Reset button
will trip and pop out).
4.
Press and release RESET (listen for
click; Reset button will latch and remain
in). The power supply cord is ready for
operation.
NOTES:
The
Reset button must be pushed in for
proper operation.
The
power supply cord must be replaced if
it fails to trip when the test button is pressed
or fails to reset.
Do
not use the power supply cord as an
off/on switch. The power supply cord is de-
signed as a protective device.
A
damaged power supply cord must be re-
placed with a new power supply cord ob-
tained
from the product manufacturer and
must not be repaired.
The
power supply cord contains no user
serviceable parts. Opening the tamper-re-
sistant
case voids all warranty and perfor-
mance claims.
•
•
•
•
•
To Next Page
Loading...
