EasyManua.ls Logo

Whirlpool W3MS450 - Forced Air + Steam Mode

Whirlpool W3MS450
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
Forced Air + Steam Mode
Cooking food with hot air and steam to prevent moisture loss during high temperature cooking. The rear fan provides good
circulation of hot air to ensure even heating on multiple levels. This mode is suitable for all types of food. It is recommended to
this mode.
Temperature Time
Default Setting 120℃ 30 mins
Setting Range 80℃ - 200℃ 5 mins - 3 hours and 59 mins
Example: Set the cooking time to 40 minutes; cooking temperature is 210°C.
Steps:
1. In standby mode, press > to Forced Air + Steam Mode. The icon will flash. Press confirm (as shown in the
2. Press to confirm the 00 hour setting (as shown in the diagram below). The display will jump to minute
3. Press < > until the minute diaplay shows 40. Press to confirm (as shown in the diagram below).
4. Press < > until the temperature diaplay shows 210°C. Press to confirm (as shown in the diagram below).
diagram below). The display will jump to hour setting automatically.
setting automatically.
The display will jump to temperature setting automatically.
5. Setting is complete. The combi steamer will start cooking.
56
W3MS450_18Jan2022_OL.indd 57W3MS450_18Jan2022_OL.indd 57 18/1/2023 上午12:0718/1/2023 上午12:07

Table of Contents

Related product manuals