INSTALLATION
READ THE ENTIRE INSTALLATION PROCEDURE CAREFULLY BEFORE
STARTING. THIS WILL ASSURE A CORRECT AND SAFE INSTALLATION.
TOOLS REQUIRED
The following is a list of tools needed to install the slide-in unit:
1. Fork Lift
2. Automotive jacks and several 24” long pieces of ½” diameter
black iron pipe
3. 2 pieces of 1 ¼” schedule 40 black iron pipe 42” long
4. Electric drill
5. Sawzall with metal cutting blades
6. Common hand tools (wrenches, hammers, etc.)
7. ¼”, 1 1/8”, 1 ½”, 1 ¾” & 3 ½” hole saws
8. Tube of silicone caulking
4
To Next Page
Loading...