PAGE 18
To Oil Machine — Have Take-up Lever In LOWEST Position
Use only Sewing Machine Oil available from your dealer —
avoid other grades. Never over-oil. ONE DROP at the points
indicated by the arrows above is sufficient. Oil the machine
when starting a sewing project — or during such. NEVER oil
the machine before putting it away for a few weeks or longer.
When and how often to oil is a matter of good judgment
because nobody but you knows how much and for how long
your machine will be operating. Just remember your machine
is a mechanical device with many moving parts.
Oiling Points Inside Face Plate— Replacing Light Bulb
These four points normally require oiling only every third or
fourth time that the average machine is oiled elsewhere. For
access to them, merely pull the face-plate cover open as
shown — which also gives access to the screw-socket type
light bulb, available from your dealer. It is a wise precaution
always to keep an extra new bulb on hand in the accessory
box.
To Next Page
Loading...
