Kunststoffschweißtechnik
Introduction
17.02.14 Working Instructions WIDOS 5500 Page 3 of 48
Purpose of the Document
These working instructions give you information about all important questions which refer to
the construction and the safe working of your machine.
Just as we are you are obliged to engage in this working instruction, as well.
Not only to run your machine economically but also to avoid damages and injuries.
Should questions arise, contact our advisers in the factory or in our subsidiary companies. We
will help you with pleasure.
According to our interest to make our products and working instructions continuously better,
we kindly ask you to inform us about problems and defects which occur in exercise.
Thank you.
Design of the Working Instructions
This manual is arranged in chapters, which belong to the different using phases of the
machine. Therefore the searched informations can be found easily.
17.02.2014 WIDOS
W. Dommer Söhne GmbH
Einsteinstraße 5
D-71254 Ditzingen-Heimerdingen
All rights reserved
Reprinting only allowed with permission of the corporation.
To Next Page
Loading...
