Kunststoffschweißtechnik
Description of Product Chapter 1
17.02.14 Working Instructions WIDOS 5500 Page 8 of 48
Ambient conditions in the welding area: - take care for cleanness (no dust at the
welding area)
- If secured by an appropriate measurement
that allowed conditions for welding are
indicated, it is possible to work in any
outside temperature condition as far as the
welder is not constrained in its manual skill.
- avoid humidity, if necessary use a welding
tent
- avoid strong sun rays influence
- protect from wind, shut the pipe ends
1.5.1.2
Hydraulic aggregate
Power: 0,56 Watt
Voltage: 230 V (+-10%)
Current: 4,7 A
Frequency: 50 Hz
Displacement of phase: appr.18°
Tank appr. 1 L
International Protection IP 54
Electromotor and pump:
Speed: 2720 rpm
Max. working pressure of pump: about 130 bar
Working pressure, adjustable: 0-130 bar
Volum velocity : 3,5 L/min
Weight : appr. 23 kg
1.5.1.3
Heating element
Power: 5,8 kW
Voltage: 400V (+-10%)
Current: 14,5 A (+-10%)
Frequency: 50 Hz
:
564 mm
Surface: nonstick-coated
Attached elements: - Electric temperature control
- Signal lamp
- Connecting cable with plug
Weight: appr. 24,5 kg
To Next Page
Loading...
