Kunststoffschweißtechnik
WIDOS Einsteinstr. 5 Phone ++49 7152 9939 - 0
D-71254 Ditzingen-Heimerdingen Fax ++49 7152 9939 - 40
W. Dommer Söhne GmbH
website: www.widos.de Email: info@widos.de
17.02.14 Working Instructions WIDOS 5500 Page 32 of 48
8. Transport
The machine can be transported in two transport boxes or in one packing box.
One transport box contains the basic machine, the aggregate and the reception box with
planer and heating element, the other box contains the reduction inserts.
In each box holders are included which are suitable for each single component in order to
avoid slipping.
Put the components into the box in such a way that they fint in the holders.
The hydraulic hoses at the basic machine should not be unscrewed (air penetration).
Make sure that they are not squeezed.
Handle the machine carefully.
Do not tilt the aggregate too much. Otherwise there is the danger that oil may come out.
Protect the machine from heavy chocs.
Make sure that the box cover is closed correctly.
During the construction of the transport box a stress was put on a light-weight construction.
Take much care when using automatic handling and carrying machines.
During the transport of the machine there may be cold weldings between the
piston rod and the eyes of the planer housing. These spots on the piston rod
may damage the sealing.
Therefore the eyes must be lubricated
with PTFE spray before each transport.
To Next Page
Loading...
