widos 5500 - Planer; Basic Frame; Protection Box; Accessories

Kunststoffschweißtechnik
Description of Product Chapter 1
17.02.14 Working Instructions WIDOS 5500 Page 9 of 48
1.5.1.4 Planer
Motor: Three-phase alternating current motor
Power: 1.1 kW
Voltage: 400 V (+-10%)
Nominal current 3,5 A
Frequency: 50 Hz (+-10%)
Speed of motor: appr. 140 rpm
Gear: Gear transmission ratio: appr. 0,5
Speed of planer: appr. 60 – 100 rpm
Atached elements:
- On/off switch
- Connecting cable with plug
Weight: appr. 100 kg
1.5.1.5
Basic frame
Reduction inserts, pipe supports Optional dimensions
Material frame: structural steel
Material reduction inserts: aluminium
Weight: 120 kg
Cylinder-Ø: 50 mm
Piston rod-Ø: 40 mm
Length of stroke of cylinder: 200 mm
Max.force (F=P*A) 14140 N (at p= 100 bar)
Velocity of piston rod: 4,1 cm/s
1.5.1.6
Protection box
Weight protection box: appr. 30 kg
See spare parts list for article numbers and single parts
1.6. Accessories:
1 Tool bag for 10 parts
1 each Allan key angulate, size 3 / 6 / 10
1 each Allan key with T-grip, size 4 / 5 / 7 (for reduction inserts and adapter piece)
1 Socket spanner size 27
1 Torx srew driver T10
optional Different reduction inserts; roller stands for the pipes;
transformator 42V