WiDrive DX-325 - Usb Mode

WiDRIVE DX-325 User’s Guide
Copyright © 2010 EDSLAB Tech. Inc.
4
Client Scan Mode
Your WiDRIVE performs as a driverless 802.11N wireless adapter in Client Scan
mode.
Slide the mode switch up and power on your WiDRIVE. Connect your computer
with WiDRIVE by an ethernet cable, and then wirelessly connect your WiDRIVE
to a router (See “Client Scan Mode Setup” on page 7 to setup Client Scan mode).
USB Mode
Connect WiDRIVE and your computer with an USB cable, your WiDRIVE is behaved as an external
storage device in USB mode.