www.williamspianos.com
Digital Piano Users Manual
’
20
Transpose
To restore the normal Transpose position (00), press both the INCREASE and DECREASE
TRANSPOSE buttons simultaneously.
MIDI
The MIDI section consists of two functions, TRANSMIT or RECEIVE, which allows you to set the Transmission
and Reception channels independently for the keyboard as a whole. Both Reception and Transmission channels
also feature a Control Change filter (on/off).You can set the MIDI Transmission and Reception channels to any
value from 1-16, or off.
If you press the MIDI RECEIVE button, the display
shows the factory-set MIDI Transmission channel.
MIDI Channel Selection
If you press the MIDI TRANSMIT button, the display
shows the factory-set MIDI Transmission channel.
Use the (+) button in the numeric keypad to increase the Transmission or Reception
channel, or the (-) button to decrease it.
The TRANSPOSE function allows you to change the pitch of the instrument in semi-tone steps, up to a
maximum setting of 12 semi-tones above or below standard pitch.
Control Change filter
To set the Control Change filter to either the Transmission
or Reception channel, press the TRANSMIT or RECEIVE
button twice. The display shows the current setting (Off).
To activate or deactivate the filter, use the (+) or (-) buttons of the numeric keypad.
Williams_Concerto-2_Q5.qxd 8/3/04 11:03 AM Page 20
To Next Page
Loading...
