Wilo Stratos PICO - Setting Modes and Device Configuration

Pump operation en
Installation and operating instructions Wilo-Stratos PICO 15
Floor surface 1 ... 120, 220, 300m²
Manual setting
Control mode
Dynamic Adapt plus
Δp-v
Δp-c
Speed n-const
Setpoint
Δp-v
H set = 0.5 ... 4, 6, 8m
Setpoint
Δp-c
H set = 0.5 ... 4, 6, 8m
Setpoint
n-const
Speed I, speed II, speed III
Night set back ON/OFF
Pressure-indep. valve ON/OFF
Device setting
Brightness 1 ... 100%
Language German, English, French
Units m, m³/h; kPa, m³/h; kPa, l/s; ft, USGPM
Key lock Key lock ON/Cancel
Factory setting Factory setting/Cancel
External module (see Chapter12)
Maintenance
Pump venting Pump venting ON/Stop
Manual restart Manual restart ON/Stop
Key lock Key lock ON/Cancel
Reset energy counter Reset energy counter/Cancel