en Pump operation
14 WILO SE 2021-12
7.2.2 Active influences (7)
In the active influences range, influences that currently influence the pump are dis-
played.
Possible active influences:
Symbol Meaning
Pump has detected an error and switched off the motor as a result.
Pump is venting and not controlling as per adjusted control function.
Pump is carrying out a manual restart and not controlling as per adjusted
control function.
There is a warning or error message.
Pump is switched off by an external module.
Detecting night set back switched on. Setback operation of the heat
generator detected. Pump running with adapted, reduced output.
Detecting night set back switched on. Pump running in daytime opera-
tion in the adjusted regulation mode.
Pump continues to run in the configured regulation mode without addi-
tional influences.
The motor is running.
The motor does not start.
Pump supplying within maximum characteristic curve range.
7.3 Menu structure
After quitting the language selection menu, all operations are initiated from the main
menu on the “home screen”. In this process, the current operating focus has been high-
lighted in green. Turn the operating button to the left or right to focus on a different
main menu.
ƒ The corresponding submenu for each selected main menu is displayed.
Press the operating button to change the focus to the corresponding submenu.
ƒ Each submenu contains further sub-menu items.
Each sub-menu item consists of an icon and a title.
ƒ The title names another submenu or a subsequent settings dialogue.
Menu selection Possible settings
Home screen
Setpoint
Pump setting
Setting assistant
No. of radiators 1 ... 15, 20, 30
To Next Page
Loading...
Need help?
General
