EasyManuals Logo

Windsor chariot iScrub 20 CS20 User Manual

Windsor chariot iScrub 20 CS20
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16 86333220 CS20
Operations
Scrub Controls
1. FUNCTION MODE SWITCH
The first two positions are for transport only. See drive controls section.
A1 - Light cleaning
This mode is used for light cleaning. In this mode the machine will propel at fast speed. The ‘floating’ scrub
deck and squeegee is in the down position. The water will flow. Water will automatically shut off in neutral and
restarts when scrubbing is resumed. The vacuum will draw the water into the recovery tank.
A2 - Deep cleaning
This mode is used for deep cleaning. In this mode the machine will propel at a low speed. The ‘floating’ scrub
deck and squeegee is in the down position. The water will flow. Water will automatically shut off in neutral and
restarts when scrubbing is resumed. The vacuum will draw the water into the recovery tank.
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor chariot iScrub 20 CS20 and is the answer not in the manual?

Windsor chariot iScrub 20 CS20 Specifications

General IconGeneral
BrandWindsor
Modelchariot iScrub 20 CS20
CategoryScrubber
LanguageEnglish

Related product manuals