83
Notes:
1. Dish Pro Plus Separator is required for dual tuner Dish Pro Plus Receivers and will allow
use of only 1 cable run to the receiver. Refer to “DP_Plus_Separator.pdf” file for
additional details.
2. Refer to “DISH_Pro_Plus_44_Switch_Installation_Guide.pdf” file for maximum cable
lengths allowed.
3. Up to 3 DPP44 switches may be cascaded together for a total of 12 output ports.
4. Refer to “DISH_Pro_Plus_44_Switch_Installation_Guide.pdf” file for check switch
details and instructions.
5. Refer to “QuickFacts_DISH1000.2.pdf” and “Dish1000.pdf” for compatible receiver and
additional technical details for Dish 1000.2.
6. The power inserter (DPP44) must have power to work. Be sure that if the satellite receiver
has power, the power inserter must also have power.
To Next Page
Loading...
