78
• For DISH Pro and DISH Pro Plus receivers, this screen should identify the installed switch as a
DISH Pro Plus 44. You should see all of the satellites received by your system on the Satellite
line, and the word All under the Dish Input numbers. You should also see the message
Satellite reception verified.
Figure 3. DISH PRO PLUS Installation Summary
• For non-DISH Pro receiver models 2800, 3900, 4900, and 6000, this screen should identify the
installed switch as an SW21 4Sat. You should see all of the satellites received by your system
on the Satellite line, and the words Even and Odd under the Dish Input numbers. You
should also see the message Satellite reception verified.
Figure 4. Non-DISH Pro Installation Summary
To Next Page
Loading...
