Winegard Trav'ler User Manual

68
After completing the wiring, return to the roof.
Follow the steps listed below.
 Apply approved sealant around the outer
edge of the hole.
 Use the cable-entry plate and position it over
the hole and cables.
 Use the appropriate number of screws to
secure the plate to the roof.
 Apply sealant around the perimeter of the
plate and over the screws.

Winegard Trav'ler Specifications

General

Mount Type	Roof Mount
Signal Acquisition	Automatic
Type	Satellite
Compatibility	DIRECTV, DISH, Bell TV
Warranty	2 Years Parts, 1 Year Labor
Operating Temperature	-13°F to 140°F