Operating and control elements
6 Operating and control elements
Start/stop rack conveyor transport
Slow rack conveyor transport
Fast rack conveyor transport
Switch for rinse temperature (special equipment)
Boiler temperature display for when the machine is being filled up or when button 4 is pressed
Tank temperature display for when the machine is being filled up or when button 4 is pressed
Indicator light for lack of detergent or rinse aid
1
7 Operation
7.1 Preparing for operation
7.1.1 Before switching on the machine
Open the water stopcock in the building.
Switch on the mains disconnector in the building.
For your own safety, test the residual-current circuit breaker (RCCB) installed in the building by pressing
the test button.
Open the machine door and check that all filters (strainers, inline filters for circulating pump and drain
pump), barrier curtains and wash arms are in place.
Close the machine door.
When using chemicals, comply with the safety notes and recommended dosages printed on the
packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Do not mix different detergent products together.
Check whether there is detergent or rinse aid in the storage tanks. Top them up in time or replace the
storage tanks so that the cleaning result will not be negatively affected.
If there are any swivelling table elements (e.g. roller conveyor) present, fix them in their working position.
Provides notification of a lack of detergent or rinse aid if storage tanks with suction tubes and level control
are used.
The indicator light blinks as soon as a storage tank is found to be empty.
To Next Page
Loading...
Need help?
General
