Software | 4 | English
Operating instructions UC-Serie | 89014383; Version 2 | 19
Exit the menu
4.2.5 Timer
The timer can be used to programme the warewasher to switch on or off automatically at a specific time.
At the time of automatic start-up, the following requirements must be met:
– The door is closed.
– The local mains disconnector is switched on.
– The local water supply is open.
Item Name
1 Set a regular time
2 Set a non-recurring date
Setting a regular time
Item Name
1 Switch the timer off/on
2 Time for automatic switch-off
3 Time for automatic start-up
4 Select timer schedule
– Daily
– Mon–Fri, Sat–Sun
– Individual (a different time on each weekday)
To Next Page
Loading...
