Winterhalter UC-M - Operation; 6.1 Switching On; 6.2 Completeness Check; 6.3 Washing Procedure

Operation | 6 | English
Operating instructions UC-Serie | 89014383; Version 2 | 35
6 Operation
6.1 Switch on the warewasher
The warewasher is ready for operation as soon as the start button lights up green.
2 s
6.2 Check for completeness
Note:Ensure that there is always enough detergent and rinse aid available to achieve an optimum wash result.
6.3 Washing
CAUTION
Risk of scalding from hot wash water
Ø Do not open the door during washing.
Ø Before opening the door, terminate the washing programme by pressing the start button and waiting a
few seconds.
– Do not wash without a wash rack.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays or objects covered with wax.
– Only wash heat-resistant plastic parts and those resistant to alkalis.
Instructions for a good wash result
– Soak the cutlery until it is clean. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery or dishes. Germs and bacteria can be found even in fresh multi-purpose cloths.
– Wash parts made of aluminium, e.g. pots, containers or trays, only with a suitable detergent to avoid black discoloura-
tion.