Winterhalter UC-M - 5.6 Initial Setup & Preservation

English | 5 | Commissioning
34 | 89014383; Version 2 | Operating instructions UC-Serie
5.6 Before working with the warewasher for the first time
Ø Arrange for the warewasher to be set up by an authorised service technician or by your dealer.
Ø Arrange for the warewasher to be connected by authorised technicians according to the locally applicable standards
and regulations (water, waste water, electrical system).
Ø After connecting the water and the power properly, contact the relevant Winterhalter dealership or your dealer to ar-
range for commissioning of the warewasher. Arrange for the operator and operating personnel to be trained in operat-
ing the warewasher.
5.7 Putting a preserved warewasher back into service
Note:Only for Excellence-i(Plus) warewashers with an integrated reverse osmosis module.
For warewashers with preserved membranes in the reverse osmosis module, the preserving agent must be rinsed off dur-
ing recommissioning.
2 s
1
1
Item Name
1 Cancel the programme
Ø Set the date and time (} page 23).
Ø Check whether it is necessary to replace the activated carbon filter (see date entry on the activated carbon filter). The
maximum service life is one year.