9 Operation
9.1 Before switching on the machine
Possible risk of damage to the pumps by suction of e.g. cutlery items
Only operate the machine when the pump inlet filter and filter cylinder are in place.
IMPORTANT Dosing devices must be primed when air gets into the dosing hose due to the containers not
being exchanged or refilled in time ( 6.3.2).
9.2 Switching on the machine
9.3 Washing
Possible risk of scalding from hot wash water
Keep children away from the warewasher. The wash water in the interior is at a temperature
of approx. 62 °C.
Do not open the door while the machine is washing. There is a risk of the hot wash water
spilling out. Stop the washing programme before doing so ( 9.3.5).
Possible risk of injury
Arrange sharp, pointed utensils so that they do not cause injury.
Do not wash parts made of plastic if they are not heat and lye-resistant.
Only wash parts made of aluminium such as pots, containers or trays with a specially
suitable detergent, to avoid black discolourations.