Servicing and maintenance
10 Servicing and maintenance
Do not spray the machine and the surrounding area (panels, base) using a water hose,
steam-jet air ejector or high-pressure cleaner.
Ensure that the base of the machine is not flooded when cleaning the floor in order to
prevent the uncontrolled inflow of water.
Wear protective clothing and protective gloves before touching parts in contact with wash water
(filters, wash arms, etc.)
10.1 Daily cleaning
10.1.1 Self-cleaning programme
A self-cleaning programme is helpful in cleaning the interior of the machine at the end of the working day.
After the first programme step, the self-cleaning programme is interrupted so that you can remove the filter
cylinder and the strainer and clean them. If you do not follow this step, the self-cleaning programme will
continue automatically after 30 seconds.
IMPORTANT
Clean the tank
heating element.