Wissner-Bosserhoff Latera - Cleaning Procedures

Product: Latera
Version: 01
42/57
Preparing for Cleaning
Prepare for cleaning as follows:
 Put the mattress platform in the highest position.
 Adjust the back and thigh rests so that the reverse sides are accessible.
 Disable the function buttons on the control elements using the supervisor panel.
 Disable the foot controls using the supervisor panel.
 Disconnect the bed from the mains.
 Move the bed to the location where it will be cleaned.
 Lock the brakes on the bed.
Cleaning
10.2.1 Daily Cleaning
Clean the following bed parts:
 All of the control elements for adjusting the bed
 All handles
 Back and calf rest handles
 CPR release handle
 Head and foot boards including aluminium columns and crossbars under the boards
 Siderails (in highest position)
 Freely accessible mattress surface
 Accessory rails
10.2.2 Cleaning before Changing Patients
Clean the following bed parts:
 All of the control elements for adjusting the bed
 All handles
 Back and calf rest handles
 CPR release handle
 Head and foot boards including aluminium columns and crossbars under the boards
 Siderails (in highest position)
 Freely accessible mattress surface
 Accessory rails
 All plastic mattress platform covers
 Plastic undercarriage covers
 Telescopic columns
 Mattress on all sides
 Freely accessible metal parts on the mattress platform
 Cable ducts
 Lifting pole sleeve fitting
 Infusion stand sleeve fitting
 Bumpers
 Castors
 Brakes