WKS i3 - WKS I Inverter Introduction

4 / 47
1.
"WKS i " inverter Introduction
The WKS I hybrid inverter is used in PV system with battery storage.
Energy produced by the PV system will be optimized for maximum self-consumption.
The WKS I inverter can work in auto or time-of-use (TOU) mode, charge / discharge the battery when needed. In
auto mode, the WKS I inverter will charge surplus PV energy into the battery & discharge battery to supply power
to local load when PV energy is not enough.
In case of blackout, WKS I inverter can work in Emergency Power Supply (EPS) mode. WKS I inverter will utilize
power from PV panels & energy stored in the battery to supply power to critical load.
Fig. 1 WKS I inverter schematic diagram