WKS i3 - Packing List; Installation Environment

9 / 47
3.2. Packing List
Inspect the package and fittings carefully before installation. You should have the following fittings:
Mounting Bracket × 1
AC terminal × 6
M5 screw × 2 Battery terminal × 2
M6 flat washer × 8
Expansion Bolts × 8
Terminal cap × 4
CT terminal × 2
Current Transformer × 1
User Manual × 1
Warranty card × 1 Quality Certificate × 1
Communication cable × 1
PV+ input terminal
×
2
PV- input terminal×2
NTC×1 (Long-3M)
Fig. 3 Accessories of WKS I inverter
3
.3. Installation Environment

Choose a dry, clean, and tidy place, convenient for installation
 Ambient temperature range: -25
℃
~ 60
℃
 Relative humidity: 0 ~ 100% (non-condensed)
 WKS I inverter shall be installed in a well-ventilated place
 No flammable or explosive materials close to WKS I inverter
 The AC overvoltage category of WKS I inverter is category III