EasyManua.ls Logo

WMF 1000pro S - Page 24

WMF 1000pro S
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Initial setup
17
> Place a collecting vessel with approximately 3 litres
capacity under the hot water spout.
While rinsing the fi lter, unusual noises are heard. This is
normal. The noises end during the fi lter rinse.
> Fill the water tank with cold tap water.
> Place the lid on the water tank.
> Slide the water tank gently into the automatic coffee
machine.
The machine subsequently heats up as shown in the
display.
After the machine is heated up, the coffee system is rinsed.
This warms up all the pipes.
> Place a collecting vessel under the All-in-One spout for
the rinse water.
The coffee system rinsing procedure lasts for about.
40 seconds.
place 3L container
under h. w. spout
Rinsing the water fi lter
heating up ...

Table of Contents

Related product manuals