Initial setup
18
At the end of the setup program, a test brew is carried out.
The Espresso button blinks.
> Place an appropriate drinking vessel under the All-In-One spout.
> Press the Espresso button.
The test brewing starts.
During this test brewing, coffee grinder is fi lled with coffee beans.
> Throw this fi rst cup of coffee away.
The coffee machine is now ready for operation.
The selected Energy saving mode, for example “E2”, is
displayed.
All the settings can be changed now or later on.
For this, refer the chapter “3.6.4 Basic settings” on page 45.
your selection pls
8:15 E2 1.3.2011
To Next Page
Loading...
