3.3.1 Milk and foam
Milk foam quality
The milk foam quality is set here.
This setting will apply to all beverages with milk foam.
Compensates for variations in milk characteristics.
Reduce setting value -> finer foam and lower dispensing
temperature
Increase setting value -> coarser foam and higher
dispensing temperature
Latte macchiato pause interval
When dispensing milk and milk foam through the combi
spout.
Latte macchiato is more successful if the interval between
milk and milk foam dispensing is lengthened.
The standard setting is 3 seconds.
Reduce setting value -> shorter interval
Increase setting value -> longer interval
Other illustrations of the main
menu for protected levels.
w PIN access control
page 35
To Next Page
Loading...
