WMF 2000 S - Software: Operating Options; Customizing Operating Modes

33
User Manual WMF 2000 S
Software
Operating options
The following operating options are available.
”Warm rinse" pad (active / inactive)•
Barista pad (active / inactive)•
• 2nd level (shift button / no)
ON / OFF button (direct / via PIN)•
Menu pad (immediate / delayed)•
Cancel beverage (yes / no)•
”Warm rinse" pad
Recommendation for self-service: inactive.
Barista pad
Recommendation for self-service: inactive.
2nd Level
Recommendation for self-service: no.
ON / OFF button
Recommendation for self-service: via PIN.
If “via PIN“ is set, then the PIN for the cleaning level will
be queried before switching on or off.
Menu pad
Recommendation for self-service: delayed.
If “delayed“ is set, the menu will only be shown if the
display is pressed twice.
Cancel beverage
Recommendation for self-service: no.
Illumination (optional)
Set the colour values here of the LEDs for the desired
illumination colour.
Setting examples red green blue
light sequence (sequence of colors) 1 0 0
amber 25 30 0
blue 0 0 30
options
If customers serve themselves then
some functions can be switched
to inactive.
The pads will not be shown on the
"ready to operate" display.
w PIN access control
page 35
w Access main menu
page 21
illumination
blue
red
setting
green
illumination