Initial setup
14
Caution!
Danger of scalding!
After the coffee system is rinsed, a strong jet of steam may be emitted from the machine.
After the machine is heated up, the coffee system is rinsed. This
warms up all the pipes.
> Place a collecting vessel for the rinse water (approx. 60 ml) under
the all-in-one spout.
The coffee system rinsing procedure lasts for about. 60 seconds.
At the end of the setup program, a test brew is carried out.
> Place an appropriate suitable drinking vessel under the all-in-one
spout.
> Confi rm with
P
.
The test brewing starts. During this test brewing, coffee grinder is
fi lled with coffee beans.
> Throw this fi rst cup of coffee away.
The WMF500 is now ready for use.
To Next Page
Loading...
