WMF 500 - Preparing Milk and Milk Foam

Operation
21
> The display notifi es:
> Pour the ground coffee (adequate for one brew) in the ground coffee inlet (13b).
> Close the lid (13c).
> Select your beverage using the beverage buttons (one cup).
The procedure can be cancelled with
C
button.
3.2.5 Preparing milk and milk foam
The WMF 500 prepares hot milk and milk foam at the touch of a button.
Hot milk (All-in-one spout in the uppermost position)
> Place an appropriate drinking vessel under the All-in-One spout.
> Push the All-in-One spout to the uppermost position.
> Press the milk button.
The preparation starts.
> Press the milk button again to stop the delivery.
After the milk is dispensed, the All-in-One spout should be pushed slightly downwards again.
Milk foam (All-in-one spout not in the uppermost position)
> Place an appropriate drinking vessel under the All-in-One spout.
> Push the All-in-One spout slightly downwards.
Cup volume: max. 15 g