WMF 500 - Warm-up Rinse; Milk System Rinse

Care
34
4.2.2 Warm-up rinse
The pipes of the automatic coffee machine are rinsed with hot water. The water is drained out via the
All-in-One spout.
> Call up the customer care programmes (see Chapter 4.2.1).
> Place a suitable vessel under the All-in-one spout.
> Confi rm the warm-up rinse with
P
button.
4.2.3 Milk system rinse
In the milk system rinse, the WMF easy clean, the milk system is rinsed with hot water. The water is
drained out via the All-in-One spout. The All-in-one spout is cleaned via a pulse of steam.
> Call up the customer care programmes (see Chapter 4.2.1).
> Push the All-in-one spout to the uppermost position.
> Wipe the outside of the milk hose with a clean damp cloth.
> Place a vessel containing at least 250 ml of water on the left
hand side of the automatic coffee machine.
> Place the end of the milk hose into the vessel.
> Place a vessel with at least 250 ml capacity under the All-in-one
spout.
> Start the milk system - rinse with
P
button.
Warm-up rinse
Milk system rinse