WMF 500 - Lubricating O-rings

Care
53
4.4 Lubricating the O-rings
> Use only WMF "Grease for sealing rings" from the accessories.
The grease/lubricant is suitable for the material and safe for food technology.
4.4.1 Lubricating O-Ring on the water tank
If it is diffi cult to remove and insert the water tank and if "fl ow fault" is displayed frequently, you must
slightly lubricate the O-ring on the water spout supports with the WMF "Gasket grease".
7a
7b
> Pull out the water tank (7a).
> Lubricate the O-ring (7b) on the water spout supports with the WMF "Gasket grease".
7