WMF 500 - Page 49

Care
44
> Replace the fi lter adapter and the water fi lter - if used - in the water tank
(”2.4 Insert the WMF water fi lter” on page 7).
> Check the correct location of the red steam nozzle (“4.3.2 Clean the steam nozzle” on page 47).
> Push the milk foamer into the All-in-One spout from below.
> Place the milk hose on the milk foamer and pull the milk hose through the guide.
> Fill the water tank with clear, cold tap water.
> Slide the water tank gently into the automatic coffee machine.
The coffee machine heats up. Steam and condensed water escape during this process.