WMF 9000 S+ - Water Filter

69
User Manual WMF9000S +
Software | System
Water filter
Options: • active
• inactive
Default value:
inactive
active
Water filter is fitted. Capacity and water
hardness are queried.
Measured carbonate hardness
Enter the measured water hardness in °dKH here.
The carbonate hardness test is supplied with the
accessories.
If the coffee machine is run with the wrong
water hardness setting, this can lead to severe
lime build up and thus to leaking valves.
No liability is assumed for any resulting damage.
Determine the water hardness
 Request drinking water hardness reading from
water supplier, or determine using WMFcarbonate
hardness test (complete with instructions) in the
accessories
Measured total hardness
Enter the measured total hardness.
Filter capacity
If the water filter is active, the filter capacity in litres is
entered here.
Water lter
DS_04_10_04
Note
We recommend using awater filter.
Your WMFservice partner will be
happy to advise you on the right
water filter to use.
NOTE