WMF 9000 S+ - Errors Without Error Message

96
User Manual WMF9000S +
Messages and instructions | Errors without error message
The ON/OFF switch reacts after about 1second
and the coffee machine switches off.
In order to clear an error, for example if the
software hangs up, touching and holding the
ON/OFF switch will switch off the controller.
Afterwards, switch the coffee machine on again.
8.3 Errors without error message
Error pattern Action instructions
• No milk foam / no milk
dispensing, although
there is milk in the
container
 Check whether the milk hose is kinked or
squashed
 Remove and clean the silicone cap
 Perform amilk system cleaning
w Care w Milk system cleaning, page 81
• Milk foam not OK
• Temperature too cold or
too hot
BasicMilk
 Change milk nozzle
Use asuitable milk nozzle on the combi spout.
Milk nozzle 3kW
• very cold milk (up to 8°C) green
• chilled milk (8to 16°C) white
• non-chilled milk (above 16°C) caramel
 Clean the combi spout
w Care w Milk system cleaning, page 81
If error not remedied
 Use another milk nozzle from the accessories
• Milk foam not OK
• Temperature too cold or
too hot
EasyMilk/DynamicMilk
 Check whether the milk temperature is the same
as the set temperature
DynamicMilk
 Perform aquality check
NOTE