87
User Manual WMF9000S +
Care | Manual cleaning
Weekly
Unscrew the steam nozzle
Immerse steam nozzle in the cleaning solution for at
least 5hours
Clean with abrush
Rinse thoroughly with clean water
Screw the steam nozzle onto the AutoSteam outlet
Immerse steam nozzle in ajug with clear water
Briefly touch an AutoSteam button
Wipe the steam outlet with adamp cloth
5.4.8 Clean the mixer
Cleaning will be more frequent depending on powder
consumption.
Scalding hazard
• If the mixer hose is not firmly attached,
hot water or hot powder beverage can be
discharged inadvertently.
> Always install the mixer hose firmly.
Slide the operating panel upward
Pull the mixer hose off of the combi spout and use
the handle to move the mixer bowl upward
The propeller for the mixer is now visible.
Daily
Remove the mixer bowl
Disassemble the mixer bowl into its four component
parts
Thoroughly clean the parts under running drinking
water
CAUTION
Follow the Safety chapter
w starting on page 7
Clean the mixer
w Main menu
w Care
w Instructions