WMF 9000 S+ - Page 88

88
User Manual WMF9000S +
Care | Manual cleaning
When needed (weekly)
 Mix 5ml of WMFspecial cleaner or aspecial
cleaning tablet with 0.5litres of warm drinking
water
 Immerse all four parts in the cleaning solution at
least for 4hours
 After 4hours, thoroughly rinse under running
drinking water again
 Remove the powder hopper and clean the loading
chute to the mixer bowl with acloth or brush
 Allow the parts to dry completely[1]
On re-assembly, all openings must face in the
same direction.
 Insert the propeller part[2] as shown in the
illustration
The green side should be visible after insertion.
 Attach mixer hose on the mixer bowl
 Replace mixer bowl until it engages in the lock
 Attach mixer hose on the combi spout
1
2